Polycom ip 331 updating initial configuration grannydating org
For example the recent 4.1 release is only providing Lync-specific features so devices currently used with other SIP platforms (.e.g Broadsoft, Avaya, Nortel, etc) should not install this update and should remain on 4.0 software for now.
For this reason it may be necessary to download the available software package for the 4.1 release and then create a custom distribution server to point the devices to.
New devices like the VVX500 and Spectra Link phones have only ever shipped with 4.x UCS releases, while older devices like Sound Point IP phones may still have previous 3.x SIP releases on them.
In order to utilize Lync integration a This process can be used on any of the Polycom SIP Phones which support 4.x software today (Sound Point IP, Sound Station IP, VVX, and Spectra Link models).
Choose which method of download you prefer and install the software on your local Windows-based machine.
In your installation process, you will be prompted to download 2.0 which can be downloaded here if not already installed:
Place the “Polycom Firmware Folder” inside the TFTP-Root Folder. TFTP Server address: 192.168.1.97, Polycom Phone address: 192.168.1.99).
Go back to your TFTP Application which should be open on your desktop. This is essential for the phone and the TFTP server to communicate with each other.
(I called it “Polycom Firmware”): Create a folder called TFTP-Root and place it on your C: Drive. The Polycom Phone that you are upgrading must be on the same network as your TFTP server application (IE.To create a custom software distribution a software package must first be downloaded, the firmware files extracted, and then a configuration file created and modified.There is still some initial setup required but this is a basic as creating a single XML file and then dropping it an the desired firmware files directly into any web server directory.Also this process can be used to downgrade software if needed as multiple versions can be stored in the same location and a menu will be presented to allow the desired version to be installed.
All currently available versions of the Polycom UCS can be located in the official software release matrix online as well as on the product support page for any model SIP phone.
familyid=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en Click download: After you have downloaded the application, open or run the Solarwinds application on your desktop: When opened it will look like this: Next, you will want to download the Polycom Firmware and Bootrom Files from the Vo IP Supply FTP website.